The three-rings and Medium-speed micro powder grinder adopts the latest technological advantages in grinding equipment. It is widely used in grinding barite, limestone, kaolin, ceram, and slag, etc. Three-rings and medium-speed micro powder grinder is different from other micro powder grinder. The three-rings and the rolling pressure ration of Medium-speed micro powder grinder is 1.2 times higher than that of the raymond grinder under the same power condition and the production output is raised to substantial degree . When a certain degree of wear of roller and ring of the Three-rings and Medium-speed micro powder is effected, The three-rings and Medium-speed micro powder is recommended to adjust the length of the spring to maintain the constant pressure between the roller and the ring. As a result, The stable output and fineness of the three-rings and Medium-speed micro powder are ensured.
Features of HGM series Three-rings and Medium-speed Micro-powder Grinding Mill:
1. Non-bearings and non-bolt in the grinding chamber;
2. The fineness of final products can be 5μm;
3. The advanced technology in domestic;
4. Long service life
Technical Data:
| Model |
HGM60 |
HGM80 |
HGM100 |
| Roller number |
15 |
21 |
27 |
| Diameter (mm) |
Φ600 |
Φ800 |
Φ1000 |
| Ring number |
2 |
2 |
2 |
| Main unit speed(mm) |
235 |
235 |
235 |
| Max. feeding size(mm) |
10 |
10 |
10 |
| Final size (mesh) |
325-2500 |
325-2500 |
325-2500 |
| Capacity (kg/h) |
350-2500 |
600-4000 |
900-6000 |
| Overall dimension (m) |
10×2×5.5 |
12.4×2.5×5.8 |
14.5×3.8×6.3 |
Notice: Any change of the HGM Three-Rings & Medium-Speed MicroPowder Mill technical data shall not be advised additionally.
Please input your inquiry in below form, we will get back to you as soon as possible!
